Welcome to LameLlama

Before attempting this or any build mentioned on this site, please ensure you are familiarized with basic electronics and are comfortable with the wiring process. We are not responsible for any damage to your mod, components or you guessed it, yourself as a result of building your mod.

You will need the following:

  • Enclosure (Hammond 1590g or similar)
  • Dual 18650 Battery Sled
  • 510 Connector
  • Fire Switch
  • Mosfet
  • Heat Shrink Tubing
  • 15k Ohm Resistor
  • On/Off Switch
  • 15 Amp Re-settable fuses x2
  • Screws or Magnets
  • 16g & 20g Electrical Wire

All of which are included in our box mod kits.

You may also require:

  • Soldering Iron
  • Solder
  • Flux
  • Epoxy

All available from our DIY section (apart from soldering irons).

 

We recommend the above video from Find my Vapes to get you started.